Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 48k BTU 95Pct ULN Gas Furnace 90Pct 060 MBH 14 SEER2

Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 48k BTU 95Pct ULN Gas Furnace 90Pct 060 MBH 14 SEER2
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, whip 6' 3/4" 8GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat

This retail set contains

Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 48k BTU 95Pct ULN Gas Furnace 90Pct 060 MBH 14 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
060 MBH Heat
Includes:
H4A6S42AKAWA, N95ESU0601716A, EVM4X48M21A, ACGKIT5
Nominal Capacity (BTUH):
42000
Cooling Efficiency (EER2):
12
Cooling Efficiency (SEER2):
14
System Indoor Type:
ULN Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Multi Position Power "V"
Furnace Efficiency:
95
System Nominal Tons:
3.5 Ton
AHRI System Number:
210107449
A/C, Single Phase, Split Gas Furnace Single Stage, Multi Position Power "V" H4A6S/N95ESU/EVM4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Ultra-Low Nox Gas Furnace

  • Efficient multi-speed ECM blower motor
  • Variable speed induced draft combustion motor
  • Single-stage gas valve
  • Stainless steel primary heat exchanger
  • Reliable direct gas ignition with Silicon Nitride Ignitor
  • High temperature limit control designed to prevent overheating
  • Solid, pre-painted steel cabinet with tight fit door latch system
  • Sound-reducing features: fully insulated cabinet with soft mounted blower and inducer motor
  • Upflow and Horizontal Installation Only
  • Natural Gas only, not convertible to Liquid Propane
  • Compatible thermostat: heat/cool with humidity sensing
  • Heating capacity: 60,000 - 80,000 BTUh
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory